When cleaning is useful
Cold radiator bottoms, a temperature difference of more than about 10°C from top to bottom, gurgling or metallic noise, slow warm-up and rising gas bills can all indicate magnetite, limescale or rust inside the system.
Radiator power flushing in Bucharest.
Where magnetite, limescale or rust restricts circulation, a controlled chemical clean can restore flow, improve heat distribution and reduce unnecessary strain on the system.
Indicative labour from 150 RON / radiator or circuit
5.0 on Google · from nearly 180 reviews
Completed by PimlicoWhat this can include.
- System assessment
- Chemical flush
- Radiator or loop cleaning
- Final circulation check
Every property is different. Robert confirms the appropriate scope and final labour price after assessing the actual requirements.
Service details.
The final scope depends on the property, existing installation and work required.
Power flushing
Pimlico uses a Kammak PROF-03 DUAL pump to reverse circulation and dislodge deposits from difficult parts of radiators and underfloor circuits, normally without removing the radiators.
Magnetic capture and treatment
MagnaClean2 filters capture iron particles during cleaning, while professional Chemstal chemicals break down accumulated magnetite, limescale and rust.
Compatible systems
The process is suitable for steel, aluminium and cast-iron radiators as well as water-based underfloor heating circuits.
The four-stage process
Thermal performance is measured, the flushing pump is connected, cleaning chemicals are circulated and contaminants are captured, then the system is protected and its final balance is checked.
Longer-term protection
Professional corrosion inhibitor is added at the end of the process to slow new magnetite formation, with protection typically intended to last two to three years under suitable system conditions.
How work is quoted and completed.
Repair or replacement
Robert explains whether repair or replacement is the more appropriate option.
Changes to the scope
If the scope changes after work begins, the reason and cost are discussed before proceeding.
Testing and handover
The work is tested, the area is cleaned and operating information is provided where required.
Booking and payment.
Appointments can be requested by phone, WhatsApp, email or the contact form.
- 01
Send the details
Call, send a WhatsApp message or photo, use the contact form, or email info@pimlico.ro.
- 02
Confirm the appointment
Robert confirms the date and time based on urgency, your availability, location and the working calendar.
- 03
Complete and test the work
Robert confirms the agreed scope, completes the work and tests the installation.
- 04
Invoice and payment
A fiscal invoice is issued at completion. Payment is available by POS/card, cash or bank transfer; company invoices can be issued on request.
Related services.
HeatingHeating installation
Boilers, radiators, underfloor heating and hot water — heating installation done properly, sized to the property.
↗HeatingBoiler installation
Boiler installation: selection, replacement, commissioning and set-up, with warranty.
↗HeatingRadiator installation & repair
Radiator installation, replacement, repair and balancing for all common radiator types — heat where it belongs.
↗What clients say.
5.0 on Google · from nearly 180 reviewsImpeccable service, Robert is very punctual, reliable, serious and fast. He even helped with more than we discussed and refused to be paid more. It's hard to find someone skilled and of character in his field of work, he is both.
Robert is very knowledgeable and very reliable, highly recommend him! He was punctual and organised, and he was able to fix a plumbing issue with our toilet, in an old block of flats built in the 1960s, so with old damaged pipes.
Without any exaggeration, the best experience I have had with an installation team… They changed all the radiators in my apartment, installed a boiler, and fixed some problematic leaks.
Booking, payment and warranty information.
Answers about materials, pricing, service areas, scheduling and the one-year workmanship warranty.
Read all questionsCan I contact you if my service is not listed?+
Yes. The website covers the most common requests, but Pimlico can assist with a wider range of plumbing, heating, gas and appliance work. Send a short description or photo for an initial assessment.
Do you take emergencies?+
Yes. The emergency line is available 24/7 on 0774 926 611 for major leaks, burst pipes, flooding and urgent boiler faults. Same-day and after-hours supplements can apply; they are explained before attendance.
What plumbing work do you do?+
Leak repairs, pipe replacement, taps, toilets, sinks, baths, showers, drainage, filters and complete plumbing systems for homes and commercial spaces.
What heating work do you do?+
Boilers, water heaters, radiators, underfloor heating, heat pumps, system cleaning, repairs, configuration and maintenance. Where relevant, work can also include chimney inspection or cleaning and clearing restricted radiators.
What gas work do you do?+
ANRE-authorised gas-system design, installation, connections, inspections, servicing and repairs for homes and commercial premises, including work serving boilers, cookers, ovens and gas water heaters.
Can I ask for an assessment or second opinion only?+
Yes. Pimlico can inspect the issue, explain the available solutions honestly and provide a cost estimate even if you later choose another provider.
Pimlico’s registered address.
Strada Locotenent Saidac Gheorghe 2 · Block 12 · Apt. 41 · Room 1
Sector 6, Bucharest · 060535
This is not a walk-in office. All installation and service work is scheduled at the customer’s property.
Open in Google MapsContact Pimlico about radiator power flushing.
Call or send us a short description and a few photos. We will confirm whether the issue can be priced remotely or requires an assessment visit.